Manufacturer: miHoYo

*Official Product*

Spec Info:

Reminiscence of Mondstadt Wax Seal Stamp Gift Box

List of Content

1. Handle in Anemo Archon Statue design x 1 & Wax Stamp Head x 3
2. Sealing Wax Strips x 2 & Bottled Wax Bead x 1
3. Heating Wax x 2 & Wax Spoon x 1
4. Postcard Set x 1

1. Handle in Anemo Archon Statue design x 1 & Wax Stamp Head x 3

• Material: zinc alloy
• Size:
  • around 30mm x 20mm (Wax Stamp Head)
  • around 38mm x 38mm x 102mm (handle, excluding the wax stamp head)

2. Sealing Wax Strips x 2 & Bottled Wax Bead x 1

• Material: paraffin
• Size: around 90mm (length of the wax strips)
• 55pcs of wax bead / bottle

3. Heating Wax x 2 & Wax Spoon x 1

• Wax Spoon
  • Material: ebana / iron
  • Size: around 105mm (length)
• Heating Wax
  • Material: paraffin
  • Size: around 40mm (diameter), around 25mm (height)

4. Postcard Set x 1

• Material: paper
• Size: around 176mm x 125mm

How to Use:

1. Take an appropriate amount of wax pellets or sticks in a spoon and heat until the solids are completely melted (but not boiling)
2. Pour the melted wax on the position to be stamped
3.  Quickly cover the stamp, keep a slight pressure and open until the wax liquid is formed
4. After the wax completely cools down, the seal will be formed.

Note:

1. Do not place lighted candles in unattended areas or near flammable items, and be sure to extinguish the candles when people leave to avoid fire hazards.
2. Open flames will be generated during use, please use fire safely to avoid burns.
3. When burning, the wax particles at the bottom melt first to produce bubbles, and at this time, the untouched wax particles can be cut to the bottom.
4. After use, please wipe it off safely before the remaining wax particles solidify, otherwise it will stick to the spoon and it will be difficult to clean.
5. Candles have high carbon content, so it is normal to have black smoke during use.
6. If the spoon is burnt black, wipe it with nail polish remover after the spoon cools down.
7. In summer, due to the high temperature, it is not easy to get out of the seal, and the cooling time can be extended, so please do not take it out immediately.
8. If the seal wax sticks to the seal, put the seal head in boiling water, and peel it off after the wax softens.